1) check the juice
All our headphones arrived fully charged, this will give you over 9 hours of usage. To check the battery level, simply tap the Power/Tune Button on ‘Right’ headphone (marked ‘R’) 4 led bars will illuminate on the power indicator.
2) Fire 'em up!
Press and hold the Power/ Tune button on ‘Right’ headphone (marked ‘R’) for 2 seconds to switch on the headphones.
3) find your jam
Now the headphones are on, lightly tap the Power/ Tune to automatically switch between available live channels. The LEDs will change colour if music is being transmitted on multiple channels. (Channel 1 = Red , Channel 2 = Green , Channel 3 = Blue)
4) crank it
(Safely of course)
To adjust the volume to best suit you, simply scroll the volume wheel. We suggest that adults make this adjustment for young children.
NB: You can normally adjust the maximum volume using the device from which you are playing the audio.
5) set party mode
There are 3 LED modes that can be selected, simply scroll through by lightly pressing and holding the ‘LED’ button on the ‘Left Headphone for 2 seconds.
- LED’s on- Static illumination
- LED’s on- Dynamic illumination
- LED’s off.
When Dynamic Illumination is selected your headphones will flash to the beat of the music!
BG863 TRANSMITTER
1) POWER
3) SELECT CHANNEL
2) AUDIO SOURCE
Turn on BG863 by plugging in the DC9V power supply. A blue light will be visible on the front of the transmitter once the power is connected.
2) AUDIO SOURCE
3) SELECT CHANNEL
2) AUDIO SOURCE
Connect BG863 to your device with the audio cable provided. Adapters are provided for devices without a headphone socket.
3) SELECT CHANNEL
3) SELECT CHANNEL
3) SELECT CHANNEL
You're good to go! Simply now ensure each transmitter is selected to its own dedicated channel (1-red, 2-green, or 3-blue) to avoid any interference. Your LED headphones will correspond with the colour of the channel it is recieving.
BG80 PRO TRANSMITTER
1) POWER
2) CONNECT AUDIO SOURCE (WIRED)
2) CONNECT AUDIO SOURCE (WIRED)
Turn on BG80 Pro by plugging in the DC12V power supply. A red light next to the LCD display will show the unit is receiving power.
2) CONNECT AUDIO SOURCE (WIRED)
2) CONNECT AUDIO SOURCE (WIRED)
2) CONNECT AUDIO SOURCE (WIRED)
Plug the red/white RCA cable into the corresponding colours indicated on the transmitter and the 3.5mm audio jack into the headphone socket of your device (RCA to RCA for DJ equipment). Adapters are provided for devices without a headphone socket.
3) OR CONNECT VIA BLUETOOTH
3) OR CONNECT VIA BLUETOOTH
3) OR CONNECT VIA BLUETOOTH
- Hold the BT button until a small red dot appears at the bottom right corner of the LCD screen. About 3 seconds later, the red/blue LED blinks alternatively in Bluetooth pairing status.
- Enable Bluetooth on your music device and search for T80, click and confirm the Bluetooth connection.
- After your device has paired with the transmitter, the transmitter will automatically enter standby mode, with the blue led blinking slowly every 5 seconds.
- Play the music source of your Bluetooth-enabled device.
4) SELECT CHANNEL
3) OR CONNECT VIA BLUETOOTH
3) OR CONNECT VIA BLUETOOTH
Pressing the ‘Channel’ button changes the channel the transmitter is using. Press to toggle between channels (1-red, 2-green, or 3-blue) the LED display will show the channel currently selected. Your LED headphones will correspond with the colour of the channel it is receiving.
NOTE: When two or more transmitters are working simultaneously, ensure that each transmitter is on a different channel.